P5, P7 sequence
P5: 5' AAT GAT ACG GCG ACC ACC GA 3'
P7: 5' CAA GCA GAA GAC GGC ATA CGA GAT 3'
참고자료
CUSTOM SEQUENCING PRIMERS
You may use a custom sequencing primer for the Read1 (side 1) sequence on either the HiSeq or the MiSeq. IF you need a
custom sequencing primer on side 2, then you must use the MiSeq instrument. The only exception is if you have 7 samples, then you can run them together on the HiSeq with the custom primer.
SIDE1 vs SIDE2
You must read side1. Even if you don’t want the sequence from side1, it is required to set the location coordinates,
matrix and phasing information for the run. If there is no data collected for side1, then the side2 read will not be captured. If
you want a custom sequence read, e.g. 25 bases on side1 and 125 bases on side2, we can do that on the MiSeq. Please ask.
SEQUENCE DIVERSITY
Libraries which begin with a linker, barcode, or other “non-random” sequence will not perform well unless they are basebalanced. This is particularly important on the MiSeq which has only 1 lane. If your sample has the same sequence in the first
6 positions, then we must add a balancer DNA, e.g. PhiX, so that the instrument can be calibrated to capture each base type
throughout the sequencing run. If your sample has barcodes in these first 6 positions, and they are base-balanced, it should
be fine. If they are not balanced, then we will need to add a balancer DNA. Base-balanced sequences have 1 of each base at
each position. For barcodes, we can go with 3 of 4 bases at each of the first 3 positions if each of the four bases is present at
least twice. For Example: (AGC) (CTG) (ATC)
If you have any questions, please ask. If you are submitting libraries with a custom sequencing primer, please
include a diagram and the results of any topo cloning or other documentation. The more we know the better we
can help you.